Troubleshooting: How To Reboot Directv Box & Fix Issues
There are a couple of ways one can reboot directv box. To reboot directv receiver press the reset button, unplug it, or restore it to factory settings.
Method 1: Press the reset button
- Find the reset button. On most DIRECTV box, there is always a red button positioned in the access card door.
- Tao the red button, then wait for your receiver to reboot.
Read more:Step by step how to save TV Shows, movies on media box hd (Amazon Firestick, Fire TV, and Android TV Boxes)Note: To reboot a Genie Mini you will have to restart the main Genie too. Resetting your DIRECTV Genie and also your Genie Mini restores local channels. Method 2: Unplug your receiver
- Unplug the receiver’s power cord socketed in the electrical outlet, wait for 15 seconds, and plug it back.
- Click on the Power button located in the front panel of your directv receiver. Wait for your receiver to reboot.
Method 3: Restore the tv receiver to factory settings Special settings, playlists, options, and favorites are all erased with this method.
- Press and hold the blue DIRECTV power button on the front of your receiver.
- Release after twenty seconds.
Here is a detailed guide on how to reboot directv box
That moment your DirecTV satellite receiver delays to tune in the channels contained in your tv programming subscription package or shows cryptic error messages that is related to subscription issues, in this post is how to fix direcTV showing any of these symptoms with a hardware reset. Directv troubleshooting procedures clear out particular parts of your receiver’s memory for settings and setups, or reduce all your preferences, reboot direcTV to new device. Not all receiving issues respond to these troubleshooting solutions, so before you starting a receiver refresh, find out what happens if you reset your directv receiver. This is step by step to fix direcTV issues.
Read more:Easy Guide On Using GOtv Remote Control
Click on the “Menu” button in your DirecTV remote control. On an HD receiver or DVR, press “Settings & Help” in the list of options and click the “Settings” screen. On SD hardware, click on “Parental, Fav’s & Setup” and tap on “System Setup.”
Tap on the “Reset” option to choices 3 choices that displays the DirecTV receiver’s system memory to restore. “Restart Receiver” refresh the DirecTV hardware, doing the same function with the red reset button found behind the front panel of your device. A restart do not touch your chosen program selections, custom guide menu and parental controls intact. “Reset Defaults” erase all your settings and selections. “Reset Everything” completely clears the entire system memory of your receiver box, also all your recorded audio in the DirecTV DVR, and shows up the step by step Setup procedure you must perform on fresh-out-of-the-box hardware.
Tap the arrow button on your remote control to display your selected reset option. Tap on the “Select” key to make your choice. Input your parental control password, if you have it, to unlock your receiver and reset it.
How to erase the History of My DirecTV Recording Program
DirecTV satellite receivers store the full history on the internal hard drive of programs recorded to the system’s DVR. The history is built to aid customers in following track of their recordings while observing what their kids are programming and watching. Each record stays in the history for upto a month before getting drop off. Wiping out the history immediately needs a complete reset of the receiver box, and or refresh of direct receiver. So proceed with caution.
Switch on your DirecTV receiver and television.
Click on the the “Menu” button on your DirecTV remote, make use of the “down arrow” key to highlight “Parental, Favorites and Setup,” then tap on the “Select” button.
Highlight and select “System Setup.”
Use the “down arrow” key to choose “Reset,” then check and press “Reset Everything.” At this point, the receiver will show a displaying message on the TV requiring your confirmation to start a full reset to the factory defaults.
Tap on the “Select” button a final time to reset the receiver to its original factory settings, which will erase the history you recorded as well as all recorded programs.
How connect a Satellite Receiver to the Internet
Updates are made available for satellite receivers, some to fix directv issues. To be able to get access to these updates, the receiver must be well connected to an Internet source. Many receivers access pre-programming schedules via an Internet connection. As a result of this, it is very important to connect your satellite receiver to your high-speed Internet connection.
Plug the Ethernet cable carefully into one of the “Out” ports on your high-speed modem.
Join the free end of the cable into the “Ethernet” port located at the back side of your satellite receiver.
Start up the high-speed modem, television and satellite receiver, if any of the device is turned off.
Click on the “Menu” button on the satellite receiver’s remote control, now choose the “Setup” option and click on the “System Setup,” “Network Setup” and finally “Connect Now”. Now receiver searches for any available Internet connections.
Confirm by pressing “OK” or “Done” once the receiver detects the Internet connection.