Browse By

How To Fix Tv Antenna & Tv Signal Good But Quality Poor

Are you having unnecessary issues accessing channels or have you noticed that your TV signal good but quality poor, Is your sound quality distorted and not as it was before? You probably have signal problems and need to improve your satellite signal quality. Follow these step by step troubleshooting method to avoid signal good but poor quality and also repair tips to improve TV reception. fix antenna problems, restore quality signals and experience wonderful picture and sound. REASONS TO USE DIGITAL ANTENNA FOR TV AT HOME

Materials needed to improve satellite signal strength

  • RF cable, if necessary
  • Signal booster, if necessary

Step 1

Check properly the connection from your antenna to your decoder or converter box and ensure that the cables are properly set. Trace the connection from your TV to the converter box. Ensure the TV is set to channel 3 or 4 to receive the signals.

Step 2

Change your RF cable connecting from your antenna to your TV if it looks corroded or spoiled. Corroded and worn-out cables affects the transmission of signals.

Step 3

change the antenna position if you are having weak signals. The higher the antenna, the more strongly it will detect the signals. At least 30 feet high is recommended. Try scanning your channels now.

Step 4

Install a signal booster between your antenna and your decoder or converter box. The signal booster improve satellite signal quality at your antenna before it reaches the decoder or converter box.

Step 5

Keep your indoor antenna near the window to have a good signal strength that will be sent to your decoder or converter box. Keep it away from electrical and electronics appliances that interfere with signals transmission like fluorescent lights and computers.

How to Set Up an HDTV Antenna

When you wish not to subscribe to a TV service, may be its time to try an indoor digital antenna. If your HDTV is not more than 15 miles from a TV station or broadcast tower, it may receive a good digital signals needed for reception. Fixing the wires and positioning the antenna will enable you enjoy hours of broadcasting without the issue of TV signal good but signal poor and at an affordable price.

Connecting the Antenna

Step 1

Switch off your Power HDTV and gently reposition it to show the ports for easy access.

Step 2

join the antenna cable to the TV’s cable antenna or VHF/UHF input port, always situated on the corner or back. Rotate the cable’s F connector clockwise against the port to fasten.

Step 3

Join the free end of the cable to your antenna’s output jack.

Step 4

Connect the power supply cord to the antenna and connect it to an electrical outlet.

Step 5

Take the antenna away from the TV to reduce electronic interference and face the antenna towards a broadcast tower. For example, open a window and shift the antenna to face outside.

Remote Control Settings

Step 1

Tap the “Menu” or “Home” key on your remote control and hold the down-arrow key until the “Channel” or “Channel Settings” option is highlighted.

Step 2

Tap the “Set” or “+” key and scroll to the “Signal” setting. Tap the arrow key to highlight the Antenna setting and tap “+” to confirm.

Step 3

Go through the channels to assess the reception on your TV. Adjust the antenna to improve the picture quality, if need arises.

How to Boost Digital TV Signal Reception

Your TV may not be Receiving ghostly and snowy images since the 2009 transition from analog to digital signals, but digital broadcasts are not always very good. Starting from channels blinking off and on to channels not being found at all by your digital decoder or converter box or television, digital TV broadcasts have its own unique set of issues. But there are so many ways to boost satellite signal quality and you don’t have to modify your decoder or digital converter box

Making Antenna adjustment

Step 1

Turn on your television.

Step 2

Remove any objects obstructing your television’s antenna to another location. Position the the antenna toward a window or other opening to improve satellite signal quality.

Step 3

Tap on “Menu” on your television, decoder, digital converter box’s remote control. Scroll to the “Signal Strength Meter.” Adjust your television’s antenna slowly as you observe the strength with tv signal strength meter to position the antenna in the highest strength location possible, if you are still receiving a poor signal on certain channels.

 

Leave a Reply

Your email address will not be published. Required fields are marked *